Dispositivo anticaídas retráctil 2 m

• Correct and regular maintenance helps prevent premature ageing of PPE. For this reason,
  users are recommended to carefully respect all indications found in the user and maintenance
  manual that accompanies each PPE and to follow the simple storage and preservation rules:
• Keep away from sunlight and UV rays as these are the primary cause of ageing of PPE textile
  fibers
• Keep PPE away from direct heat sources as the synthetic textile fibers used to make harnesses,
  lanyards, and energy absorption systems have a very low melting temperature
• PPE must be stored in cool and dry areas, as humidity generates mold harmful to textile fibers
  and corrosive on metal parts.
• A periodic cleaning operation is essential to ensure a good durability of the PPE. A washing with lukewarm water eliminates surface dirt and that present inside the textile fibers

PHASE 1. Connect the retractable fall arrester to the anchor point
PHASE 2. Connect the connector on the end of the wire rope or textile webbing to the breast or back harness ring, if necessary (access from below) use the lanyard supplied as standard to retrieve the end of the wire rope
PHASE 3. Progress in total freedom both up and down, the device follows the operator’s movements, ready to intervene
PHASE 4. If you use the lanyard to recover the connector, at the end of the work it must be released slowly until the wire rope has completely rewound. DO NOT release the lanyard suddenly as this could cause damage to the retractable fall arrester