| Art./Item | Length (mt) | Misura (m.) |
|---|---|---|
| 27908 | 10 | - |
A retractable type fall arrester with a 10 metre long galvanised steel rope and energy absorber, capable of a maximum load capacity of up to 120 kg and a breaking strength of 12 kN.
The retractable type fall arrester with shock-proof ABS protective cover can be used on both flat and sloping surfaces, for restraint and positioning purposes only, where there is no possibility of falling. Equipped with an energy absorber, the 10 m retractable device guarantees safety, autonomy and freedom of movement for the operator during use.
TECHNICAL SPECIFICATIONS
- Shockproof protective casing
- Length 10 m
- Breaking load 12 kN
- Maximum load capacity 120 kg
- Rope diameter 4.8 mm
- Energy absorber
- Horizontal use possible
- Standard EN 360
MATERIAL
- Rope: galvanised steel
- Casing: shockproof ABS
Maintenance and storage of PPE
PPE periodic checks and inspections
Correct and regular maintenance helps prevent premature ageing of PPE. For this reason, users are recommended to carefully respect all indications found in the user and maintenance manual that accompanies each PPE and to follow the simple storage and preservation rules:
- Keep away from sunlight and UV rays as these are the primary cause of ageing of PPE textile fibers
- Keep PPE away from direct heat sources as the synthetic textile fibers used to make harnesses, lanyards, and energy absorption systems have a very low melting temperature
- PPE must be stored in cool and dry areas, as humidity generates mold harmful to textile fibers and corrosive on metal parts
- A periodic cleaning operation is essential to ensure a good durability of the PPE
- A washing with lukewarm water eliminates surface dirt and that present inside the textile fibers
The current legislation requires that each equipment must be subjected to periodic inspections:
- Before, during and after use, the user must check the PPE conditions and integrity through a visual inspection after each use
- At least every 12 months, PPE must be subjected to mandatory periodic checks and inspections by competent personnel authorized by the manufacturing company
Each PPE is accompanied by a manual and identity card that must be kept for the entire use duration of the product and filled in with the periodic inspections data.
Recommended use
Confined spaces
Restraint (on fixed surface)
Inclined surface
Basic Touch Gloves Work gloves with grip
Waste disposal bucket Square waste bucket 40 L
ABS cutter Snap-off blade cutter
Thin Touch Gloves Gloves for maintenance work
You may also be interested in:
Related products
Alfa 5 5 attachment fall arrest harness
