6 m retractable type device

Retractable device with fall indicator

Find the Kapriol dealer closest to you
Show article variant table
Art./ItemLength (mt)
279476

Compact and lightweight retractable type fall arrester consisting of a durable 6 metre long polyester webbing, impact-resistant plastic protective cover and practical swivel connector for attachment to the harness. The anchorage system by means of a swivel ring makes the fall arrest device extremely safe and comfortable, guaranteeing freedom of movement for the operator. 

The materials with which it is made, together with the fall indicator inserted in the attachment connector, make this Kapriol retractable type fall arrester particularly suitable for work at heights where there are covers or equipment sensitive to impact. 

 

TECHNICAL SPECIFICATIONS

  • 17 mm wide and 6 m long tape
  • Swivel connector for attachment to the harness 
  • Anchorage with swivel ring
  • Shock protective cover
  • Fall warning device inserted in the attachment connector
  • Breaking load 15 kN
  • Standard EN 360


MATERIAL

  • Tape: polyester  
  • Casing: shockproof ABS

Maintenance and storage of PPE

Critical factors

PPE periodic checks and inspections

Product identification

Working life

Pendulum effect

Correct and regular maintenance helps prevent premature ageing of PPE. For this reason, users are recommended to carefully respect all indications found in the user and maintenance manual that accompanies each PPE and to follow the simple storage and preservation rules:

  • Keep away from sunlight and UV rays as these are the primary cause of ageing of PPE textile fibers
  • Keep PPE away from direct heat sources as the synthetic textile fibers used to make harnesses, lanyards, and energy absorption systems have a very low melting temperature
  • PPE must be stored in cool and dry areas, as humidity generates mold harmful to textile fibers and corrosive on metal parts
  • A periodic cleaning operation is essential to ensure a good durability of the PPE
  • A washing with lukewarm water eliminates surface dirt and that present inside the textile fibers

The current legislation requires that each equipment must be subjected to periodic inspections:

  • Before, during and after use, the user must check the PPE conditions and integrity through a visual inspection after each use
  • At least every 12 months, PPE must be subjected to mandatory periodic checks and inspections by competent personnel authorized by the manufacturing company

Each PPE is accompanied by a manual and identity card that must be kept for the entire use duration of the product and filled in with the periodic inspections data.

If the operator is connected to an anchorage point by a retracting device or a rope, in the event of a fall there may be hazardous and uncontrolled side swinging, the so-called pendulum effect. To decrease the risks associated to the pendulum effect, it is important that the fall protection device is positioned vertically in relation to the work area.

The operator must therefore work with a safety clearance of 30° below the anchorage point. When it is not possible to position the rope retracting or fall protection devices in a perpendicular position in relation to the anchorage point, it is necessary to foresee a number of deviation or sheave points to dampen the pendulum effect.

Recommended use

Confined spaces

Restraint (on fixed surface)

Customers who bought this item also bought

Basic Touch Gloves Work gloves with grip

Waste disposal bucket Square waste bucket 40 L

Thin Touch Gloves Gloves for maintenance work

Fluorescent spray can Fluorescent spray paint