Rigger safety boots

Steel safety toe-cap that provides total foot protection in the event of objects falling from heights from impacts of up to 200J, which is equivalent to the energy caused by a stone of 10kg from a height of 2m.

Anti-puncture midsole made of high-hardness stainless steel. Ensures high resistance in case of contact with sharp materials such as nails, sharp blades, scrap metal. Protects the foot from injuries, cuts and punctures.

Soles that repel and do not absorb oily substances, and  maintain their characteristics and performances. The test is performed by an immersion in Trimethylpentane. The volume must not increase more than 12%.

Work shoes marked S1-S2-S3 have anti-static properties. They permit low voltage current passage, thus discharging the electrostatic loads accumulated by the operator.

Thanks to a special treatment the uppers are waterproof. The test is performed by sealing the shoe and by immersing it in a water bath after introducing compressed air. Lack of air bubbles indicates that the upper is waterproof.